Automated Negotiation for Provisioning Virtual Private Networks Using FIPA-Compliant Agents

This paper describes the design and implementation of negotiating agents for the task of provisioning virtual private networks. The agents and their interactions comply with the FIPA specification and they are implemented using the FIPA-OS agent framework. Particular attention is focused on the design and implementation of the negotiation algorithms

High field magneto-transport in high mobility gated InSb/InAlSb quantum well heterostructures

We present high field magneto-transport data from a range of 30nm wide InSb/InAlSb quantum wells. The low temperature carrier mobility of the samples studied ranged from 18.4 to 39.5 m2V-1s-1 with carrier densities between 1.5x1015 and 3.28x1015 m-2. Room temperature mobilities are reported in excess of 6 m2V-1s-1. It is found that the Landau level broadening decreases with carrier density and beating patterns are observed in the magnetoresistance with non-zero node amplitudes in samples with the narrowest broadening despite the presence of a large g-factor. The beating is attributed to Rashba splitting phenomenon and Rashba coupling parameters are extracted from the difference in spin populations for a range of samples and gate biases. The influence of Landau level broadening and spin-dependent scattering rates on the observation of beating in the Shubnikov-de Haas oscillations is investigated by simulations of the magnetoconductance. Data with non-zero beat node amplitudes are accompanied by asymmetric peaks in the Fourier transform, which are successfully reproduced by introducing a spin-dependent broadening in the simulations. It is found that the low-energy (majority) spin up state suffers more scattering than the high-energy (minority) spin down state and that the absence of beating patterns in the majority of (lower density) samples can be attributed to the same effect when the magnitude of the level broadening is large

Control of nonenzymatic browning in intermediate-moisture foods

Series of compounds called humectants were found to decrease rate of browning when added to intermediate-moisture foods. Twenty percent level of humectant can increase shelf life of foods by factor of 5 or 6

Rapid point-of-care testing for COVID-19: quality of supportive information for lateral flow serology assays

Objective There is a lack of evidence addressing several important human factors questions pertaining to the quality of supportive information provided by commercial manufacturers that can affect the adoption and use of lateral flow serology assays in practice. We aimed to: (1) identify and assess the quality of information that commercial manufacturers provided for their point-of-care tests (POCTs) and (2) examine the implications of these findings on real-world settings. Design We used a content analysis methodology in two stages to systematically, code and analyse textual data from documents of commercial manufacturers. A deductive approach was applied using a coding guide based on the validated Point-of-Care Key Evidence Tool (POCKET) multidimensional checklist. An inductive approach was used to identify new patterns or themes generated from our textual analysis. Setting Publicly available supportive information documents by commercial manufacturers for lateral flow serology, were identified and gathered from online searches. Participants Supportive information documents retrieved from online searches over 3 months (March 2020 to June 2020). Results A total of 79 POCTs were identified that met the study inclusion criteria. Using the POCKET coding guide, we found that the quality of information varied significantly between the manufacturers and was often lacking in detail. Our inductive approach further examined these topics and found that several statements were vague and that significant variations in the level of details existed between manufacturers. Conclusions This study revealed significant concerns surrounding the supportive information reported by manufacturers for lateral flow serology assays. Information transparency was poor and human factor issues were not properly addressed to mitigate the risk of improper device use, although it should be noted that the results of our study are limited by the data that manufactures were prepared to disclose. Overall, commercial manufacturers should improve the quality and value of information presented in their supporting documentation

Strain compensated InGaAs/AlAs triple barrier resonant tunnelling structures for THz applications

We report a theoretical study of InGaAs/AlAs triple barrier resonant tunnelling heterostructures which are optimised for operation in the terahertz frequency range, and compare these to current state of the art double barrier structures realised in the literature. We consider the effect of strain introduced due to the large lattice mismatch of the substrate, quantum well and potential barrier materials and describe designs with strain compensated active regions. Constraints have been imposed on the designs to minimise charge accumulation in the emitter quantum well which is often associated with more complex triple barrier structures. The use of a triple barrier structure suppresses the off resonance leakage current, thus increasing the maximum output power density, with � 3 mW�

Why you need to include human factors in clinical and empirical studies of in vitro point of care devices? Review and future perspectives

Use of in-vitro point of care devices - intended as tests performed out of laboratories and near patient - is increasing in clinical environments. International standards indicate that interaction assessment should not end after the product release, yet human factors methods are frequently not included in clinical and empirical studies of these devices. Whilst the literature confirms some advantages of bed-side tests compared to those in laboratories there is a lack of knowledge of the risks associated with their use. This article provides a review of approaches applied by clinical researchers to model the use of in-vitro testing. Results suggest that only a few studies have explored human factor approaches. Furthermore, when researchers investigated people-device interaction these were predominantly limited to qualitative and not standardised approaches. The methodological failings and limitations of these studies, identified by us, demonstrate the growing need to integrate human factors methods in the medical field

Is the LITE version of the usability metric for user experience (UMUX-LITE) a reliable tool to support rapid assessment of new healthcare technology?

Objective To ascertain the reliability of a standardised, short-scale measure of satisfaction in the use of new healthcare technology i.e., the LITE version of the usability metric for user experience (UMUX-LITE). Whilst previous studies have demonstrated the reliability of UMUX-LITE, and its relationship with measures of likelihood to recommend a product, such as the Net Promoter Score (NPS) in other sectors no such testing has been undertaken with healthcare technology. Materials and methods Six point-of-care products at different stages of development were assessed by 120 healthcare professionals. UMUX-LITE was used to gather their satisfaction in use, and NPS to declare their intention to promote the product. Inferential statistics were used to: i) ascertain the reliability of UMUX-LITE, and ii) assess the relationship between UMUX-LITE and NPS at different stages of products development. Results UMUX-LITE showed an acceptable reliability (α = 0.7) and a strong positive correlation with NPS (r = 0.455, p < .001). This is similar to findings in other fields of application. The level of product development did not affect the UMUX-LITE scores, while the stage of development was a significant predictor (R2 = 0.49) of the intention to promote. Discussion and conclusion Practitioners may apply UMUX-LITE alone, or in combination with the NPS, to complement interview and ‘homemade’ scales to investigate the quality of new products at different stages of development. This shortened scale is appropriate for use in the context of healthcare in which busy professionals have a minimal amount of time to support innovation

FORTY FIVE YEARS OF ANTICOAGULANT RODENTICIDES — PAST, PRESENT AND FUTURE TRENDS

The anticoagulant rodenticides were discovered in the 1940s and their advantages of efficacy and safety quickly resulted in their use dominating the practice of rodent control in temperate countries. However, the development of resistance to the early compounds within a decade stimulated research culminating in the invention of anew class of anticoagulant, the second generation compounds, active against resistant strains but also overall far more potent than those previously available. A novel baiting strategy, pulsed baiting, was developed to make full use of this valuable characteristic. Pulsed baiting has enabled the use of second generation anticoagulants in situations where early products were of limited value, particularly in tropical agriculture. The future of this highly-successful group of compounds is reviewed in relation to resistance and the difficulty and cost of developing further rodenticides

On the ubiquity of molecular anions in the dense interstellar medium

Results are presented from a survey for molecular anions in seven nearby Galactic star-forming cores and molecular clouds. The hydrocarbon anion C6H- is detected in all seven target sources, including four sources where no anions have been previously detected: L1172, L1389, L1495B and TMC-1C. The C6H-/C6H column density ratio is greater than about 1.0% in every source, with a mean value of 3.0% (and standard deviation 0.92%). Combined with previous detections, our results show that anions are ubiquitous in dense clouds wherever C6H is present. The C6H-/C6H ratio is found to show a positive correlation with molecular hydrogen number density, and with the apparent age of the cloud. We also report the first detection of C4H- in TMC-1 (at 4.8-sigma confidence), and derive an anion-to-neutral ratio C4H-/C4H = (1.2 +- 0.4) x 10^-5 (= 0.0012 +- 0.0004%). Such a low value compared with C6H- highlights the need for a revised radiative electron attachment rate for C4H. Chemical model calculations show that the observed C4H- could be produced as a result of reactions of oxygen atoms with C5H- and C6H-

Rodent control and island conservation

Most rodent species are highly adapted, selected, boom-or-bust strategists. Such pre-adaptation to invasiveness allows them quickly to take advantage of abundant new resources and is why rodents are among the most successful mammalian colonizers of islands. This chapter discusses the impacts of alien invasive rodents on natural ecosystems, with emphasis on oceanic islands, and review management techniques to mitigate their effects